SBS A043 Wireless In Ear Monitor
₹28,320.00
wireless in ear monitor system 1 channel 40 frequencies can be preset,easy to setup. Strong signal METAL receivers and Transmitter UHF wireless ear-in monitoring system band Phase lock PLL Good for Stage performance and speaker built-in limiter circuit eliminate distortion at excessive input level. The front panel 1/4 inch stereo monitor has headphone jacks for use on the stage, which can replace the traditional sophisticated sound monitoring equipment to achieve an admirable monitoring effect. Design features- elegant LCD and LCD display, low battery power indicator lamp on receiver. With power supply and radio frequency receiving indicator lamp. With two AA batteries and high efficiency power supply circuit, it has long service life and durable metal shell. Wireless Range and Frequency Range – Input Ear Monitoring and Receiving System provides desktop-level monitoring. The wireless range can reach 300 feet with set up antenna
| Weight | 0.25 kg |
|---|---|
| Dimensions | 21 × 22 × 4.4 cm |
| Receiver Frequency Range | 572-603.5MHz,606-630MHz,740-776MHz,798-830MHz |
| Transmitter Frequency Range | 572-603.5MHz,606-630MHz,740-776MHz,798-830MHz |
| Audio output channel mode | Receiver : Mono, Transmitter : Mono |
| Modulation Mode | Receiver : FM(PLL), Transmitter : / |
| Number of channel | Receiver : 1680, Transmitter : 1680 |
| Bandwidth | Receiver : 25Mhz, Transmitter : 25Mhz |
| Channel spacing | Receiver : 250Khz, Transmitter : 250Khz |
| Frequency stability | Receiver : ± 0.005%, Transmitter : / |
| Dynamic range | Receiver : 95dB, Transmitter : / |
| Maximum offset | Receiver : ± 55KHz, Transmitter : ± 55KHz |
| Frequency response | Receiver : 60HZ-18KHz (±3dB), Transmitter : 60HZ-18KHz (±3dB) |
| Signal to noise ratio | Receiver : > 102dB, Transmitter : > 102dB |
| T.H.D | Receiver : ≤ 0.8%, Transmitter : <1% |
| Output Socket | Receiver : Balanced XLR and MIC Output, Transmitter : / |
| Output Level | Receiver : 0~300mV (ADJ), Transmitter : / |
| Power Supply | Receiver : 12-18V DC/1A, Transmitter : / |
| RF output | Receiver : /, Transmitter : 10mw |
| Spurious Rejection | Receiver : /, Transmitter : >55dBc |
| Input voltage | Receiver : /, Transmitter : mic 1V max |
| Power | Receiver : /, Transmitter : 2×1.5V (AA) |
| Battery use of time | Receiver : /, Transmitter : >8h |
| Note | Can use 20 bodypack+ headset in the same time |
| Brand |
You must be logged in to post a review.
Related Products
- 3x 5G, 3x 4G
- 1x Ethernet
- 1x Wi-Fi
- 2x USB ports
- upto 50mbps
8 Channels HD to RF Cable TV Encoder Modulator HPR8402MF is Catcast’s professional high integration device which includes encoding, multiplexing, and modulation. It supports 4/8 HD MI input, 2 Carriers of RF output (DVB-C、DVB-T、ATSC、ISDB-T optional), IP (MPTS&SPTS) output. In conclusion, its high integrated and cost effective design makes the device widely used in varieties of digital distribution systems such as cable TV digital head-end, IPTV head-end, digital TV broadcasting etc.
8 Channel HDMI Video Encoder
- Model Number:
- Input:
-
8xHDMI(audio bulid-in)
- Output:
-
Ethernet Port(1000BASE-T)
- Streaming Protocol:
-
HTTP, RTSP, SRT, RTMP, RTMPS, UDP, RTP, ONVIF, HLS(M3U8), Multicast
- Video Encoding:
-
MPEG-4 /H.264 AVC
- Audio Encoding:
-
AAC, AAC+, AAC++, MP3, MP2, AC3, G.711
- Video Streaming:
-
2 Video Streams Output Simultaneously for Each Channel
- Bitrate Control:
-
32kbit /s to 32mbit /s Adjustable
- Video Resolution:
-
Max 1920x1080P /60fps Input and Output
- Service:
-
Provide SDK and API and CGI for Secondary Development
Swit S-8D58 Key features
- Support for Panasonic VW-VBD58-type battery
- Panasonic AG-CX8, AU-EVA1, AG-DVX200, and AJ-PX270
- DC barrel output at 7.2 VDC (nominal)
- Broadcast delivery over public Internet
- Low latency
- Error recovery
- Protocol Conversion
- Protection from packet loss, bandwidth fluctuations, jitter and delay
- End-to-end AES encryption
- Intuitive GUI
VividEdge ELLVIS9000 SRT Gateway
OTON S06-A 4Ch HDMI Video Switcher
Key Features
- 6 Channel video inputs – 4xHDMI, 2xUSB File or decoding video
- 2 HDMI output – 1 for program and 1 for multiview
- Audio inputs – 2×6.3mm , HDMI embedded audio
- Audio outputs – 1×3.5mm, HDMI de-embedded audio
- Cut direct switching or Take transitional switching with wipe, fade, mix effects
- Transition rate 0.5s-5s adjustable
- Supersource PIP and POP
- Support adding logos and subtitles
- Audio mixing
- Work as USB webcam for stream software
- Built-in H.264/H.265 encoding
- Multistream to 4 platforms at the same time
- Record program video to USB disk
- Support both vertical video and horizontal video
- FTB emmergency mode
Reviews
There are no reviews yet.